|
Approved and used by the FAA and Military
Skyflex
Conduit for
radial engines. Approved by both the FAA and U.S. military, these leads
feature brass fittings and a rugged neoprene covering molded onto a brass
conduit, which is cut to fit your radial engine.
Skyflex
Conduits features:
- All conduit
jackets made of genuine, molded neoprene.
- Assembled
conduits are subjected to high pressures to insure tightness against
air and moisture.
- To form a
solid, ruggedized bond to and into the braid of the conduit,
neoprene jackets are pressure molded.
- All nuts are
made of plain finish, precision threaded brass entirely free of tool
marks.
- Brass,
chamfered ferrules are soldered onto the conduit with high
temperature solder to insure an unbreakable bond and leave a
clearance of 1/16" at the top of the ferrule. This clearance
permits rubber to flow under the ferrule during the molding process,
an exclusive Skyflex feature! In addition, ferrules are deeper to
allow for a greater soldering surface.
Skyflex Neoprene:
The
special neoprene covering employed on Skyflex conduits, (as opposed to
ordinary AMS compounds used by other manufacturers) is a proven, tested
compound which took many months to develop. The basic difference is that
Skyflex neoprene uses a small quantity of chemical additives, in place of
the usual paraffin to produce O-Zone resistance. Result? Within a given
mass of compound, there is always more pure neoprene in the Skyflex
jacket, hence less weather checking, longer life!
Skyflex
Conduit manufactured by Skytronics Inc. under the most stringent quality
control procedure.
|
