|
|
|
|
|
|
|
|
|
|
|
||
AERO-LITE HARNESS
PART NUMBERS FOLLOW THE 5 STEPS BELOW
|
PART NUMBER FORMULA |
|
1 |
|
2 |
3 |
4 |
|
5 |
|
|
|
|
|
|
|
|
|
|
|
YOUR PART NUMBER |
|
|
- |
|
|
|
- |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A2 |
- |
1 |
A |
S |
- |
II |
|
SAMPLE PART NUMBER |
|
O-235
ENGINE |
|
20
SERIES MAGS |
SMALL
PLUGS |
STRAIGHT
LEADS |
|
Aero-Lite
II Swaged
plates |
|
1 Aero-Lite Harness
Code |
|
2 Magneto Type |
|
3 Spark Plug Size |
|
4 Spark Plug Connection |
|
5 Magneto Plate Type |
|
Find Aero-Lite Harness Codes For your engines On the following Pages LYCOMING CONTINENTAL |
|
1 = Bendix S4-20 or 200 4 Cyl. 2 = Bendix S6-20 or 200
6 Cyl. 3 = S4-1200 Series 4
Cyl. 4 = S6-1200 Series 6 Cyl. 5 = Slick 4000 Series 4
Cyl. 6 = Slick 400, 500, 600
Series No Plate. This is a lead set. Leave Part Number
Formula, position # 5 blank. 8 = No Plate. This is a lead set. Specify as follows: Eismann: (-LA) at Part Number Formula, position # 5. Scintilla: specify either Oblique (-SFO) at Part Number
Formula, position # 5. Magneto ports
point in different directions. Vertical (-SFV) at Part Number
Formula, position # 5. Magneto ports point in
the same direction. 9 = Bendix 1200 Series 8
Cyl. Place a -1 in Part Number
Formula, position # 5. 10 = Bendix 2000/3000
Series Leave Part Number
Formula, position # 5 blank. 11 = Slick 6000 Series 6
Cyl. This harness is not
available in Magneto Plate type Blank. |
|
A = SMALL BARREL 5/8" -24 or REM 3/4 “ Wrench Size B = LARGE BARREL 3/4" -20 or RHM 7/8 “ Wrench Size |
|
S = Straight Lead R = Low Profile 90 Degree Brass Elbow. Clearance needed for elbows from the back of the plug as follows: Small Barrel Plugs:
1 1/4 “ Large Barrel Plugs:
1 3/8 “ |
|
Blank = Aero-Lite Original Harness- machined lead fittings screw into threaded magneto plate ports and duals. I = Aero-Lite custom Harness- rebuilt to customer specifications using original magneto plate. 8 cylinder 1200 series II = Aero-Lite II manufactured with new FAA/PMA swaged magneto plates. LA, SFO, SFV = For the –8 magneto type. |
|
CONTINENTAL ENGINES |
||||||||||
|
Cylinder |
||||||||||